Free launchDownload up to 2 cut files a day for free until 18 December 2026. Then $5.99 per file.

Cut files for Cricut, Silhouette & lasers

Iron-on (HTV) designs from any image

Turn a logo, a quote or a drawing into a clean HTV cut file: the background removed, as few layers as you choose, and every piece checked so it weeds and presses well.

Works with
  • Cricut Maker
  • Cricut Explore
  • Cricut Joy
  • Silhouette Cameo
  • Silhouette Portrait
  • Brother ScanNCut
  • Glowforge
  • xTool
  • LightBurn

Fewer layers, better shirts

Every HTV colour is pressed separately, so each extra layer is another chance of misalignment and more vinyl on the fabric. One to three colours give the cleanest result. In the example above, white text on navy becomes one white layer; the navy is removed, because the shirt itself provides it.

Before you cut

The steps people forget most:

  • Mirror the design in your cutting software: HTV is cut from the back, shiny carrier side down.
  • Check thin parts at the shirt size: letters thinner than about 1 mm tend to lift after washing.
  • Weed with the design still on the carrier sheet, then press.
  • For multi-colour designs, press each layer briefly and finish with a final full press.

Sizes that look right

Common sizes are about 7–9 cm wide for a chest logo, 25–30 cm for an adult front print and 15–20 cm for a child’s shirt. Type that width on the download page and the Cut-Ready Check shows what is too small at that size.

Pressing tips

Every HTV brand has its own temperature, time and pressure, and the right values also depend on the fabric. Use the values on the vinyl packaging or the manufacturer’s heat guide, and pre-press the shirt for a few seconds to remove moisture and wrinkles.

Peel hot or cold as the vinyl requires. If an edge lifts, cover it and press again. Wait at least a day before the first wash, and wash inside out. Designs with fewer, larger pieces survive washing far better than designs with many tiny parts, which is why the Cut-Ready Check flags small pieces.

Typical HTV sizes
PlacementWidth
Left chest7–9 cm
Adult front25–30 cm
Child front15–20 cm
Sleeve6–8 cm

Last updated

Made for cutting

Not just an SVG. A file that cuts right the first time.

Most converters make vectors that look fine on screen and fail on the machine. Ours are built for blades and lasers.

One clean layer per colour

Shapes sit side by side, never stacked, so each colour cuts once with no double cuts and no hairline gaps.

No specks, smooth curves

Noise and JPEG fuzz are cleaned out, and curves are fitted with few nodes. Your machine glides instead of stuttering.

Cut-Ready Check

Tell us the size you will cut. We flag pieces too small or too thin to cut and weed, before you waste vinyl.

One-click background removal

The plain background around your design disappears, while white parts inside the design stay put.

Stencil bridges

The middles of O, A and B stay attached automatically, so stencils come out in one piece.

Laser-ready files

Red cut lines, black engrave fills and kerf compensation in millimetres, for LightBurn, Glowforge and xTool.

How it works

Three steps, about a minute

  1. 1

    Drop your image

    PNG, JPG or WebP. Logos, drawings, lettering and clip art give the crispest results.

  2. 2

    Preview for free

    Pick your machine and colours, remove the background, then zoom in on the edges. No account needed.

  3. 3

    Download and cut

    Pay $5.99 once and get SVG, DXF, PDF, EPS and PNG, plus the Cut-Ready tools.

Every format included

One upload, every project

Each purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline files for pens, foil and engraving.

SVGDXFPDFEPSPNGCenterline
  • Vinyl decalsSVG · layered
  • Iron-on / HTVSVG · mirrored in Design Space
  • StencilsSVG · DXF with bridges
  • Laser cut & engraveSVG · DXF · kerf
  • Print Then Cut stickersPNG 3000 px
  • Signs & logosPDF · EPS for print

Pricing

Simple, fair, per file

Pay only for the designs you actually cut. Nothing renews.

Pay per file

$5.99per image

No subscription to forget. No account to create.

  • SVG, DXF, PDF, EPS & PNG, no watermark
  • Cut-Ready Check at your real size
  • Background removal & recolouring
  • Stencil bridges & laser-ready files
  • Full refund within 14 days
Start with a free preview

Private by design

Your image and files are deleted automatically after 7 days. We never use them for anything else.

It cuts, or it's free

If the file doesn't cut well, email us within 14 days for a full refund. No forms, no arguing.

See before you pay

Preview up to 5 images a day for free, zoomed in on the edges, before you spend a cent.

Questions

Frequently asked

Do you mirror the file for me?

No. Cutting software mirrors at the cutting step (in Design Space, on the Prepare screen), so the file stays the right way round for other uses.

Is the preview really free?

Yes. You can preview up to 5 images a day without an account. During our launch, until 18 December 2026, downloads are free too (2 a day). After that you pay $5.99 when you download the clean files.

Which formats do I get?

Every purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline SVG and DXF, with no watermark.

What happens to my image?

Your image and files are deleted automatically after 7 days. We never use them for anything else.

What if the file does not cut well?

Email us within 14 days and we refund you in full. No forms, no arguing.

Ready to cut?

Drop an image and see your cut file in seconds. The preview is free.

Make a cut file