Free launchDownload up to 2 cut files a day for free until 18 December 2026. Then $5.99 per file.

Cut files for Cricut, Silhouette & lasers

Turn any image into a Cricut SVG

Cricut Design Space can trace images, but you get one colour at a time and a lot of clean-up. Here you get every colour as a separate, clean layer, sized and checked for weeding.

Works with
  • Cricut Maker
  • Cricut Explore
  • Cricut Joy
  • Silhouette Cameo
  • Silhouette Portrait
  • Brother ScanNCut
  • Glowforge
  • xTool
  • LightBurn

Check before you waste vinyl

Type the size you will cut, say 10 cm for a shirt pocket, and the Cut-Ready Check marks every piece too small or too thin to weed at that size.

You see a weeding difficulty score from 1 to 10 before you load a single sheet. If the score is high, choose fewer colours or cut the design larger.

How many colours?

Every colour is a separate cut and a separate sheet of vinyl, so fewer is easier. A cartoon like the cat above looks complete with five or six colours; a shirt usually needs only two or three. Auto picks the number of colours the image really has; you can also set 1, 2, 3, 4, 6 or 8.

Upload to Design Space

In Design Space choose Upload, then Upload image, then Browse, and pick the SVG. Each colour shows up as its own layer, ready to attach or change. Our Design Space upload guide walks through every step.

Cricut Joy and Joy Xtra have a smaller cutting area, so check the size in the Cut-Ready Check first. For iron-on, remember to mirror; see HTV and iron-on.

Writing, drawing and foil

Cricut pens, foil and scoring tools follow a line instead of cutting around a shape. A filled SVG gives you an outline drawn around every shape, which looks like a double line. For a single line, use the centerline SVG included in every download, and change its operation to Draw, Foil or Score in Design Space.

Centerlines work best on line art and lettering with strokes of even width, such as handwriting or a monoline font.

Smallest pieces that weed well (at the final size)
MaterialThinnest partSmallest piece
Adhesive vinyl0.8 mmabout 1 mm²
Iron-on (HTV)1 mmabout 1.5 mm²
Cardstock0.8 mmabout 1 mm²

Last updated

Made for cutting

Not just an SVG. A file that cuts right the first time.

Most converters make vectors that look fine on screen and fail on the machine. Ours are built for blades and lasers.

One clean layer per colour

Shapes sit side by side, never stacked, so each colour cuts once with no double cuts and no hairline gaps.

No specks, smooth curves

Noise and JPEG fuzz are cleaned out, and curves are fitted with few nodes. Your machine glides instead of stuttering.

Cut-Ready Check

Tell us the size you will cut. We flag pieces too small or too thin to cut and weed, before you waste vinyl.

One-click background removal

The plain background around your design disappears, while white parts inside the design stay put.

Stencil bridges

The middles of O, A and B stay attached automatically, so stencils come out in one piece.

Laser-ready files

Red cut lines, black engrave fills and kerf compensation in millimetres, for LightBurn, Glowforge and xTool.

How it works

Three steps, about a minute

  1. 1

    Drop your image

    PNG, JPG or WebP. Logos, drawings, lettering and clip art give the crispest results.

  2. 2

    Preview for free

    Pick your machine and colours, remove the background, then zoom in on the edges. No account needed.

  3. 3

    Download and cut

    Pay $5.99 once and get SVG, DXF, PDF, EPS and PNG, plus the Cut-Ready tools.

Every format included

One upload, every project

Each purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline files for pens, foil and engraving.

SVGDXFPDFEPSPNGCenterline
  • Vinyl decalsSVG · layered
  • Iron-on / HTVSVG · mirrored in Design Space
  • StencilsSVG · DXF with bridges
  • Laser cut & engraveSVG · DXF · kerf
  • Print Then Cut stickersPNG 3000 px
  • Signs & logosPDF · EPS for print

Pricing

Simple, fair, per file

Pay only for the designs you actually cut. Nothing renews.

Pay per file

$5.99per image

No subscription to forget. No account to create.

  • SVG, DXF, PDF, EPS & PNG, no watermark
  • Cut-Ready Check at your real size
  • Background removal & recolouring
  • Stencil bridges & laser-ready files
  • Full refund within 14 days
Start with a free preview

Private by design

Your image and files are deleted automatically after 7 days. We never use them for anything else.

It cuts, or it's free

If the file doesn't cut well, email us within 14 days for a full refund. No forms, no arguing.

See before you pay

Preview up to 5 images a day for free, zoomed in on the edges, before you spend a cent.

Questions

Frequently asked

Does it work with Cricut Joy, Explore 3 and Maker 3?

Yes. The SVG is standard and works with every Cricut machine through Design Space.

Is the preview really free?

Yes. You can preview up to 5 images a day without an account. During our launch, until 18 December 2026, downloads are free too (2 a day). After that you pay $5.99 when you download the clean files.

Which formats do I get?

Every purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline SVG and DXF, with no watermark.

What happens to my image?

Your image and files are deleted automatically after 7 days. We never use them for anything else.

What if the file does not cut well?

Email us within 14 days and we refund you in full. No forms, no arguing.

Ready to cut?

Drop an image and see your cut file in seconds. The preview is free.

Make a cut file