Import into LightBurn
Use File, then Import, and pick the SVG or DXF. LightBurn assigns each colour in the file to a layer, so a three-colour design arrives as three layers you can set to Line, Fill or Offset Fill independently.
If the design imports at the wrong size, set the final width in our converter first; the file then carries its real size in millimetres.
Red cut, black engrave
The laser-ready tool on the download page writes red outlines for cutting and optional black fills for engraving, a layer set-up many LightBurn users already follow. It can also grow every outline by half your kerf so parts fit.
Clean paths save time
Messy traces cost laser time: thousands of tiny segments make the head jerk, and open paths are skipped or cut twice. Our outlines are closed and fitted with smooth curves and few nodes, so jobs run smoothly. You can check with LightBurn’s own path optimisation preview.
Common import questions
- Everything is on one layer: the design was traced with one colour. Re-make it with two or three colours, or split shapes onto layers in LightBurn.
- Fills look wrong: LightBurn fills closed shapes; nested shapes become holes, which is what you want for letters like O and A.
- The job takes ages: turn on cut optimisation in LightBurn, and check the design is not much more detailed than the material can show.
- Parts do not fit: use the kerf option on our download page or LightBurn’s kerf offset, not both.
| Part of the design | LightBurn mode |
|---|---|
| Outer outline | Line (cut) |
| Solid areas, text | Fill (engrave) |
| Thin decorative lines | Line at low power (score) |
Last updated