How the Glowforge app reads your file
The Glowforge app accepts SVG, PDF, PNG and JPG, but not DXF. Vector files are split into steps by colour: every colour can be set to cut, score or engrave. That is why a traced SVG with a few clean colours is easier to work with than a photo.
Choose 1 colour for a design that is only cut or only engraved, and 2 colours to separate a cut outline from an engraved area.
Size it before you upload
Type the final width in our converter, for example 250 mm for a sign, and the SVG is written at that size. In the Glowforge app it then appears at the right size on the bed instead of needing to be scaled by eye.
Material tips
Thin parts burn away. On wood and acrylic, keep features above about 0.3 mm at the final size; the Cut-Ready Check marks anything thinner. For designs with many loose pieces, like letters cut out of a board, see the stencil maker to add bridges.
Cut, score or engrave each colour
Order matters: engrave and score first, cut last, so the piece does not move before the other steps are done.
- Cut: use for the outer shape of a sign, a coaster or an ornament.
- Engrave: use for filled areas such as large lettering or a logo; engraving fills the shape.
- Score: use for fine decoration; it follows the outline at low power, giving a thin line.
- Ignore: turn off a colour you do not want, for example a background that came with the image.
Last updated