From a photo of a printout
The example above is a phone photo of a printed sign, with uneven light and paper texture. The light is evened out before tracing, so the paper becomes one background colour and the lettering one clean layer.
Engrave, score or cut
Most signs combine three operations:
- Engrave filled areas such as large letters or a logo.
- Score thin decorative lines at low power.
- Cut the outer shape, or cut letters out to glue onto a backing board.
Size, thickness and fit
Set the final width to your board, for example 300 mm. For cut-out letters glued onto a sign, keep strokes at least 2–3 mm wide so they do not break. For inlays, set your kerf on the download page so pieces fit snugly. More on laser-ready files.
Planning the layout
Measure the board first and leave a margin of at least 10 mm around the design, more if the edges will be rounded or routed. Set the design width to fit inside that margin.
Decide what each part of the design will be before you trace. Two colours are usually enough: the dark colour becomes engraving, the light one is the wood. If you want cut-out letters, check that every letter is in one piece or joined to its neighbours, and that the dots of i and j have somewhere to sit. A thin connecting line under script lettering keeps everything attached.
| Operation | Thinnest stroke |
|---|---|
| Engraved lettering | about 0.5 mm |
| Cut-out letters, 3 mm plywood | about 2–3 mm |
| Scored lines | any (single line) |
Last updated