Free launchDownload up to 2 cut files a day for free until 18 December 2026. Then $5.99 per file.

Cut files for Cricut, Silhouette & lasers

Cut files for Silhouette Cameo and Portrait

Turn any image into a cut file for Silhouette Studio, with one layer per colour. Using the free Basic Edition? You get a DXF it can open, too.

Works with
  • Cricut Maker
  • Cricut Explore
  • Cricut Joy
  • Silhouette Cameo
  • Silhouette Portrait
  • Brother ScanNCut
  • Glowforge
  • xTool
  • LightBurn

Basic Edition or Designer Edition?

The free Basic Edition of Silhouette Studio does not open SVG files; that needs Designer Edition or higher. It does open DXF. Every purchase includes both, so you are covered either way.

With the SVG in Designer Edition, colours arrive as filled shapes you can cut by colour. With the DXF in Basic Edition, you get the outlines; group or colour them in Studio as you like.

Opening the file

In Silhouette Studio use File, then Open, and choose the SVG or DXF. If your design comes in at the wrong size, set the final width in our converter before you download; the file then carries its real size.

Silhouette-friendly settings

A few choices help on the Cameo and Portrait:

  • Choose Silhouette in the converter: small specks are cleaned more strictly, as for vinyl.
  • Keep thin parts above about 0.8 mm at the final size; the Cut-Ready Check marks anything thinner.
  • For Print & Cut stickers, use the 3000 px PNG; see Print Then Cut stickers.

Cutting by colour in Silhouette Studio

In Designer Edition, open the Send panel and choose to cut by fill colour. Each colour of the design can then be cut on its own, one vinyl at a time, which is the Silhouette way of handling layered designs.

In Basic Edition with the DXF, every shape arrives as an outline. Select the shapes for one colour and cut them together, or fill them in Studio to see the design as it will look. Saving your work as a .studio file keeps those choices for next time.

Which file for which edition
Silhouette Studio editionFile to open
Basic (free)DXF
Designer, Designer Plus, BusinessSVG (or DXF)

Last updated

Made for cutting

Not just an SVG. A file that cuts right the first time.

Most converters make vectors that look fine on screen and fail on the machine. Ours are built for blades and lasers.

One clean layer per colour

Shapes sit side by side, never stacked, so each colour cuts once with no double cuts and no hairline gaps.

No specks, smooth curves

Noise and JPEG fuzz are cleaned out, and curves are fitted with few nodes. Your machine glides instead of stuttering.

Cut-Ready Check

Tell us the size you will cut. We flag pieces too small or too thin to cut and weed, before you waste vinyl.

One-click background removal

The plain background around your design disappears, while white parts inside the design stay put.

Stencil bridges

The middles of O, A and B stay attached automatically, so stencils come out in one piece.

Laser-ready files

Red cut lines, black engrave fills and kerf compensation in millimetres, for LightBurn, Glowforge and xTool.

How it works

Three steps, about a minute

  1. 1

    Drop your image

    PNG, JPG or WebP. Logos, drawings, lettering and clip art give the crispest results.

  2. 2

    Preview for free

    Pick your machine and colours, remove the background, then zoom in on the edges. No account needed.

  3. 3

    Download and cut

    Pay $5.99 once and get SVG, DXF, PDF, EPS and PNG, plus the Cut-Ready tools.

Every format included

One upload, every project

Each purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline files for pens, foil and engraving.

SVGDXFPDFEPSPNGCenterline
  • Vinyl decalsSVG · layered
  • Iron-on / HTVSVG · mirrored in Design Space
  • StencilsSVG · DXF with bridges
  • Laser cut & engraveSVG · DXF · kerf
  • Print Then Cut stickersPNG 3000 px
  • Signs & logosPDF · EPS for print

Pricing

Simple, fair, per file

Pay only for the designs you actually cut. Nothing renews.

Pay per file

$5.99per image

No subscription to forget. No account to create.

  • SVG, DXF, PDF, EPS & PNG, no watermark
  • Cut-Ready Check at your real size
  • Background removal & recolouring
  • Stencil bridges & laser-ready files
  • Full refund within 14 days
Start with a free preview

Private by design

Your image and files are deleted automatically after 7 days. We never use them for anything else.

It cuts, or it's free

If the file doesn't cut well, email us within 14 days for a full refund. No forms, no arguing.

See before you pay

Preview up to 5 images a day for free, zoomed in on the edges, before you spend a cent.

Questions

Frequently asked

Why does my SVG not open in Silhouette Studio?

The Basic Edition cannot open SVG files. Use the DXF from your download, or upgrade to Designer Edition.

Is the preview really free?

Yes. You can preview up to 5 images a day without an account. During our launch, until 18 December 2026, downloads are free too (2 a day). After that you pay $5.99 when you download the clean files.

Which formats do I get?

Every purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline SVG and DXF, with no watermark.

What happens to my image?

Your image and files are deleted automatically after 7 days. We never use them for anything else.

What if the file does not cut well?

Email us within 14 days and we refund you in full. No forms, no arguing.

Ready to cut?

Drop an image and see your cut file in seconds. The preview is free.

Make a cut file