Free launchDownload up to 2 cut files a day for free until 18 December 2026. Then $5.99 per file.

Cut files for Cricut, Silhouette & lasers

PNG to DXF for lasers and CNC

Get a DXF with closed outlines at the real size you need, in millimetres. Add kerf compensation and separate cut and engrave layers with the laser-ready tool.

Works with
  • Cricut Maker
  • Cricut Explore
  • Cricut Joy
  • Silhouette Cameo
  • Silhouette Portrait
  • Brother ScanNCut
  • Glowforge
  • xTool
  • LightBurn

A DXF your software accepts

We export a classic DXF with closed outlines, the flavour that LightBurn, xTool Creative Space, Inkscape and most CNC and plasma software open without complaint.

Set the final width before you preview and the file comes out at that size in millimetres. No rescaling guesswork. Glowforge users: the Glowforge app takes SVG rather than DXF, see SVG for Glowforge.

Kerf, cut and engrave layers

A laser beam burns away about 0.1–0.3 mm of material. For parts that must fit together, the laser-ready tool on the download page grows each outline by half your kerf.

It also writes red cut lines and optional black engrave fills, the convention many laser users set up as layers in LightBurn.

Closed shapes only

Every outline in the file is closed. Open lines are a common reason a laser skips part of a design or a CNC program refuses a toolpath. If you need single lines on purpose, for scoring or pen plotting, use the centerline DXF that comes with every purchase.

Opening the DXF at the right size

DXF files can carry units, but not every program reads them the same way. If a design opens 25.4 times too big or too small, the program has read millimetres as inches or the other way round. In LightBurn and most CAD software you can choose the import unit; pick millimetres.

The surest way is to set the final width in our converter before you preview. The file is then written at that size, and you only need to check that your software agrees. For CNC work, check the size against a known dimension before you start a job.

Which file for which machine
Machine / softwareUse
LightBurnDXF or SVG
xTool Creative SpaceSVG or DXF
Glowforge appSVG
CNC router, plasma, CADDXF
Cricut, Silhouette Studio Designer+SVG

Last updated

Made for cutting

Not just an SVG. A file that cuts right the first time.

Most converters make vectors that look fine on screen and fail on the machine. Ours are built for blades and lasers.

One clean layer per colour

Shapes sit side by side, never stacked, so each colour cuts once with no double cuts and no hairline gaps.

No specks, smooth curves

Noise and JPEG fuzz are cleaned out, and curves are fitted with few nodes. Your machine glides instead of stuttering.

Cut-Ready Check

Tell us the size you will cut. We flag pieces too small or too thin to cut and weed, before you waste vinyl.

One-click background removal

The plain background around your design disappears, while white parts inside the design stay put.

Stencil bridges

The middles of O, A and B stay attached automatically, so stencils come out in one piece.

Laser-ready files

Red cut lines, black engrave fills and kerf compensation in millimetres, for LightBurn, Glowforge and xTool.

How it works

Three steps, about a minute

  1. 1

    Drop your image

    PNG, JPG or WebP. Logos, drawings, lettering and clip art give the crispest results.

  2. 2

    Preview for free

    Pick your machine and colours, remove the background, then zoom in on the edges. No account needed.

  3. 3

    Download and cut

    Pay $5.99 once and get SVG, DXF, PDF, EPS and PNG, plus the Cut-Ready tools.

Every format included

One upload, every project

Each purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline files for pens, foil and engraving.

SVGDXFPDFEPSPNGCenterline
  • Vinyl decalsSVG · layered
  • Iron-on / HTVSVG · mirrored in Design Space
  • StencilsSVG · DXF with bridges
  • Laser cut & engraveSVG · DXF · kerf
  • Print Then Cut stickersPNG 3000 px
  • Signs & logosPDF · EPS for print

Pricing

Simple, fair, per file

Pay only for the designs you actually cut. Nothing renews.

Pay per file

$5.99per image

No subscription to forget. No account to create.

  • SVG, DXF, PDF, EPS & PNG, no watermark
  • Cut-Ready Check at your real size
  • Background removal & recolouring
  • Stencil bridges & laser-ready files
  • Full refund within 14 days
Start with a free preview

Private by design

Your image and files are deleted automatically after 7 days. We never use them for anything else.

It cuts, or it's free

If the file doesn't cut well, email us within 14 days for a full refund. No forms, no arguing.

See before you pay

Preview up to 5 images a day for free, zoomed in on the edges, before you spend a cent.

Questions

Frequently asked

Which DXF version do you export?

The main download is a DXF with polylines. The laser-ready tool exports DXF R12 polylines for maximum compatibility with older software.

DXF or SVG for my laser?

Both carry the same shapes. Our guide on SVG vs DXF explains which one to pick for your software.

Is the preview really free?

Yes. You can preview up to 5 images a day without an account. During our launch, until 18 December 2026, downloads are free too (2 a day). After that you pay $5.99 when you download the clean files.

Which formats do I get?

Every purchase includes SVG, DXF, PDF, EPS and a 3000 px PNG of the same design, plus single-line centerline SVG and DXF, with no watermark.

What happens to my image?

Your image and files are deleted automatically after 7 days. We never use them for anything else.

What if the file does not cut well?

Email us within 14 days and we refund you in full. No forms, no arguing.

Ready to cut?

Drop an image and see your cut file in seconds. The preview is free.

Make a cut file